Skip to main content

Safety Island Communication/HIPC - Baremetal Stock Image

The goal of this firmware is to enable reliable communication between the Primary Compute and the three Safety Island clusters, as well as between the Safety Island clusters themselves, using the MHUv3 for signal transmission, shared SRAM for data exchange, and the RPMsg protocol for standardized messaging across heterogeneous cores. For more detailed information, please visit the Arm documentation.

Safety Island Communication/HIPC diagram

Run the firmware image​

  1. Create a virtual RD-1AE board running the Safety Island Communication/HIPC (Baremetal)-1.0 (1.0) firmware image. For further details, please refer to the RD-1AE Quickstart guide.

  2. When the device boots, navigate to the Console tab and select Primary Compute Non-Secure from the console selector dropdown.

  3. Login as root.

  4. To interact with the different Safety Island Clusters through the console, select one from the console selector dropdown.